Feb.2014. New Vag K+ Can software released. Download software from the following links.

VAG K + Can

Vagtacho v.5.0

Opel DT v.3.5

NOTE . This New software will only work with the new K+Can cable. For earlier cable, with separate dongle use VagTacho v5.0

VagTacho is a laptop based OBD tool designed to extract PIN numbers, program keys, correct mileage etc. on a large range of VAG vehicles. With the optional 14 pin adapter cable, you can extract the PIN and program keys on VW LT vehicles in minutes.

New Functions with VagTacho K+CAN

Built-in programmer for Megamos ID48 transponders! Direct programming of TP22,23,24,25 chips to to VAG cars with CAN from Nov.2003 to June.2006 ! Pre-programming of TP2x transponders as dealer’s keys with component security data which is read from immobiliser! Note: TP22,23,24,25 transponders are required! PIN code is NOT required! Golf Mk 6 PIN reading. VAG Kombiinstrument / Immo box eeprom programmer! Windows 7, Vista, Win XP, Win 98 compatible software! Support for VDO dashes for VW,Skoda,Seat from years 2009-2011 with NEC mcu and 24C32 or 24C64 eeprom. Important: These dashes requires ignition to be switched on with valid key of the car! Built-in programmer for Megamos ID48 transponders! Pre-programming of TP2x transponders as dealer’s keys with component security data which is read from immobiliser! “Unlock Transponder” feature in the latest software version! NEW Super Rapid key programming feature for VAG cars with VDO dashes on CAN bus! ( TP2 and UDS protocols )

This is the the genuine tool, Not an Ebay Chinese copy.

Switch ON ignition with the new key. Be sure that the type of transponder key is correct, use TP23 for VW, TP25 for Audi, TP22 for Seat, TP24 for Skoda! Start software, select “VDO NEW – CAN bus” from menu. Press “Connect Selected ECU” button, after 5 seconds the data of the dash will be shown on screen. Press “Program New Key”, software will open a new window. See the picture. Check “Erase all old keys” if you wish. In this case all keys will be erased. If you left this unchecked, the new key will be added to the existing keys. No need to program all available keys again. Press “Continue” , the new key will be programmed in 5 seconds. Wait while the immobiliser’s warning lamp is turned off. Turn off/on ignition, and start engine. If the immobiliser’s warning lamp starts flashing faster, this means that the type of the transponder key is not correct, or this key is already programmed to the car! Repeat again the same procedure from the beginning for every next key.

Updates are free for life, and downloadable from our download section

VAG PIN Extraction & Key programming

VAG Instrument / Immo box eeprom programmer!
Windows 7, Vista, Win XP, Win 98 compatible software!
Works on any computer which has got USB port!
Most of VAG dashes from 1997 to 2006 are supported!

List of supported VAG cars:


Golf 6, Jetta, Polo, EOS, Touran, Tiguan, Caddy, Amarok, Transporter with VDO dash 2009 – 2011 Passat with VDO dash 2009 – 2011 (mileage change only!) Gol G6 with VDO dash 2012 – present Golf 5, Caddy, Touran, Jetta, EOS with VDO dash 2003 – June.2006 Golf 4, Bora with VDO or Motometer/Bosch dash: 1997-2003 Beetle with Marelli dash: 1998 – 2005 Passat, Jetta, with VDO, Marelli or Motometer dash: 1997-2004 Polo with VDO or Motometer dash: 1999-2006 (1999-2002 mileage change only) Sharan with VDO dash: 2000-2006(mileage change only) Caddy, Lupo with VDO or Motometer dash 1997 – 2002(mileage change only) Transporter with VDO dash 1998 – 2006 LT35 ( Temic immo box) 1999-2003 (pin code read only) Gol ( Kostal immo box) 1999-2003 (pin code read only)


Alhambra, Ibiza with VDO dash 2009-2011 Altea, Leon, Toledo with VDO dash 2003 – 6/2006 Leon, Toledo, Cordoba, Ibiza with VDO or Motometer dash 1997-2003 Alhambra with VDO 2000 – 2004(mileage change only) Inca with VDO or Motometer 1997 -2000(mileage change only)


Octavia, Fabia II, Roomster, Yeti, Rapid with VDO dash 2009-2011 Octavia with VDO dash 2005 – 6/2006 Octavia, Fabia with VDO dash 1997 – 2004


A3 VDO dash 2003 – 2005 A3,A4,A6 VDO dash 1997 – 2000 A3,TT,A6 Magnetti Marelli dash 1998 – 2003 A4 Bosch dash 2000 – 2008 – Read/write of encrypted data with V4.5! A4,A6,A8 1995-1999 (immo box – read pin code)

Direct programming of Megamos ID48 (JMA-TP08) chips to VAG cars on CAN bus from November.2003 to June.2006 Transponder Maker Pro is required for pre-programming of these chips. Note: TP22,23,24,25 transponders are NOT required!

Download Manual

OPEL Immobilizer diagnostic software.

Immo1, 2 and Immo3 (CAN bus) supported up to year 2009 Pin code reading from engine ecu of some Opel cars with Immo2 Program/erase keys of immo1,2 and 3 (Pin code is required) Clear engine ecu, adaptation of virgin ecu to Immo2 Clear immo2, immo3, adaptation of virgin Immo2 to engine ecu. Program new pin code of immo2, immo3.

PIN code read from Opel cars with Delco Multec engine ecu

HSFI 2.0-2.5 – Model – Year – Engine
Vectra B 2000-2001 Y16XE,Z16XE
Astra G 2001-2005 Z14XE,Z16XE,Z16SE
Corsa C 2001-2004 Z14XE
Meriva 2003-2004 Z16SE
Astra,Corsa with Delco 1.7 DTI diesel 1999-2004
Delco “F” Old Multec Model Year Engine
Astra,Vectra B 1998-2000 X16SZR

SKU: VAGTACHO Categories: ,